Current Affairs

What materials are needed to manufacture blanks for mechanical parts processing?

发布时间:2020.09.26

分享:

The application of metal accessories, screws, or nuts, and other accessories is mainly due to the continuous increase in mechanical equipment. You can see that the current aerospace technology, or the application of CNC equipment, and the processing of mold accessories are all assisted by mechanical equipment. The overall effect is relatively obvious, improving the processing speed and bringing certain benefits to manufacturers. This is still relatively good.


 Engaged in mechanical processing and high-precision mechanical parts manufacturing, the selection and determination of blanks not only affects the economy of blank manufacturing, but also affects the economy of mechanical processing. Therefore, when determining the blank, it is necessary to consider both hot processing factors and economic factors, and also take into account the requirements of cold processing, so as to reduce the manufacturing cost of parts from the link of determining the blank.


1. Castings: Blanks of parts with complex shapes should be manufactured by casting. At present, most castings are cast by sand casting, which is divided into wooden mold manual molding and metal mold machine molding. The precision of wooden mold hand-molded castings is low, the machining surface allowance is large, and the production efficiency is low. It is suitable for single-piece small batch production or casting of large parts. Metal mold machine molding has high productivity and high casting precision, but the equipment cost is high and the weight of the casting is also limited. It is suitable for small and medium-sized castings produced in large quantities. Secondly, a small number of small castings with high quality requirements can be cast by special castings, such as pressure casting, centrifugal manufacturing and investment casting.


2. Forgings: Steel parts with high mechanical strength requirements generally use forging blanks. Forgings are divided into free forging forgings and die forgings. Free forging forgings can be obtained by hand forging (small blanks), mechanical hammer forging (medium-sized blanks) or press forging (large blanks). This kind of forging has low precision, low productivity, large machining allowance, and the structure of the parts must be simple. It is suitable for single-piece and small batch production, as well as the manufacture of large forgings.


The precision and surface quality of die forgings are better than those of free forgings, and the shape of forgings can also be more complex, thus reducing machining allowances. The production efficiency of die forging is much higher than that of free forging, but it requires special equipment and forging dies, so it is suitable for small and medium-sized forgings with large batches.


3. Profiles: Profiles can be divided into round steel, square steel, hexagonal steel, flat steel, angle steel, channel steel, I-beam and other profiles with special cross-sections according to the cross-sectional shape. Profiles are divided into two categories: hot-rolled and cold-drawn. Hot-rolled profiles have low precision but low price, and are used for blanks of general parts; cold-drawn profiles are small in size, high in precision, and easy to realize automatic feeding, but the price is higher, and are mostly used for large-scale production and suitable for automatic machine tool processing.


Fourth, welded parts: welded parts are combined parts obtained by welding. The advantages of welding are simple manufacturing, short cycle, and material saving. The disadvantages are poor vibration resistance, large deformation, and mechanical processing after aging treatment. Reasonable selection of blanks for mechanical manufacturing of precision parts can not only save material costs, but also save a lot of processing time and improve production efficiency.


Copyright © Suzhou Kairun Industrial Technology Co., Ltd.